About the tool

---

• Hands free as you adjust your track
• Sled can be adjusted on trailside
• Saves time
• More accurate and repeatable 
• Eliminates back and forth while adjusting

Download Diagram

Instructions

Step 1
Prepare the machine for track adjustment using factory specs with 6 inches below the track.

---

Step 2
Insert the tee block into the track.  20 pounds setting small section down, 10 pounds setting small section up.

NOTE: If NOT 20 lbs setting use the formula (Deflection ÷ lbs x 20) = New deflection.
Use tee block with small section down in track.
When using 10 lbs setting just install tee block with small section up and add 1/2 inch to deflection.

---

Step 3
From below the track, insert the tool with the indicator side pointing up (red stripe). Thread the tool into the block by turning it clockwise until the desired deflection mark is obtained.

---

Step 4
Adjust the track tension until the indicator pin is exposed and flush to the top of the deflection screw,

---

Step 5
Carefully remove the tool and repeat the entire process for the track on the other side.

---

Step 6
Carefully remove the tool and secure the track adjustments per the factory specifications.

---

Order the ISAT

Download Instructions